Opening Doors with No Power

In the unlikely event that Cybertruck has no low voltage power, you will not be able to open the doors from the interior by pressing the interior door open buttons. Instead, use the manual door releases.

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Manual door releases are designed to be used only in situations when Cybertruck has no power. When Cybertruck has power, use the interior door open buttons.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Do not use the manual door release while the vehicle is moving.

Opening a Front Door with No Power

To open a front door manually, pull up the manual door release located in front of the window switches and push the door open.

an arrow motioning to pull up on the door release switch

Opening a Rear Door with No Power

To open a rear door manually, perform the following steps:

  1. Remove the rubber mat on the bottom of the rear door's map pocket.
    The rear door shown from the interior, with an arrow showing how the map pocket lining is removed
  2. Pull back the flap of plastic trim (if equipped), then pull the mechanical release cable forward and push the rear door open.
    The rear door mechanical release cable