While driving:

• Elevated driving speed.
• Environmental conditions such as cold or hot weather and wind.
• Using climate controls to heat or cool the cabin.
• Uphill travel: Driving uphill requires more energy and depletes range at a faster rate. However, driving downhill allows your vehicle to regain a portion of its expended energy through regenerative braking (see Regenerative Braking).
• Short trips or stop-and-go traffic: It takes energy to bring the cabin and Battery to a specified temperature when starting the vehicle. You may see a higher average consumption when the vehicle is used for very short trips or in heavy traffic.
• Heavy cargo load.
• Windows rolled down.
• The tonneau cover staying open.
• Towing a trailer.
• Driving on soft or sandy terrain (see Off-Road Driving).
• Wheels and tires not maintained.
• Customized settings or third-party accessories (roof or trunk racks, third party wheels).

While parked and not plugged in to a charger:

• Preconditioning the cabin or using climate controls.
• Summon.
• Vehicle infotainment and climate controls system.
• Sentry mode.
• Tesla or third-party mobile app requests.
• The outlets in the cabin or the cargo bed are in use. For more information, see Interior Electronics and Cargo Bed Outlets.

You can maximize your driving range using the same driving habits you use to conserve fuel in a gasoline-powered vehicle. To achieve maximum range:

• Slow down your driving and avoid frequent and rapid acceleration. Consider using Chill Mode (touch Controls > Acceleration) and Speed Assist (see Speed Assist) to assist in controlling your acceleration and speed.
• If safe to do so, modulate the accelerator pedal instead of using the brake pedal when gradually slowing down. Whenever Cybertruck is moving and you are not pressing the accelerator pedal, regenerative braking slows down the vehicle and feeds surplus energy back to the Battery (see Regenerative Braking).
• Limit the use of resources such as heating and air conditioning. Using seat and steering wheel heaters (if equipped) to keep warm is more efficient than heating the cabin using climate controls.
• With your vehicle plugged in, use the mobile app to precondition your vehicle to ensure the cabin is at a comfortable temperature and windows are defrosted (if needed) before your drive by touching Climate > On and customizing your preferences (see Mobile App).
• Touch Schedule, (also available on both the charging and climate control screens) to set a time when you want your vehicle to be ready to drive (see Scheduled Precondition and Charge).
• Ensure the wheels are aligned to specification, the tires are kept at the recommended inflation pressures (see Tire Pressures), and are rotated when needed (see Maintenance Service Intervals).
• Install wheel covers (if equipped) to reduce wind resistance.
• Lighten your load by removing any unnecessary cargo.
• Fully raise all windows and close the tonneau cover.
• Features such as Sentry Mode and Cabin Overheat Protection can impact range. Disable features when not needed.
• To prevent an excessive amount of energy consumption while the vehicle is idle, keep the vehicle plugged in when not in use.

It is normal for estimated range to decrease slightly over the first few months before leveling off. Over time, you may see a gradual, but natural, decrease in range at full charge – this depends on factors such as the mileage and age of the Battery. Your Cybertruck will inform you in the unlikely event a hardware issue is causing excessive Battery or range degradation.

The driving range displayed in Cybertruck is an estimate of the remaining battery energy based on EPA-rated consumption. It may not account for your personal driving patterns or external conditions. The displayed range on the may decrease faster than the actual distance driven.

Your vehicle continuously monitors its energy level and proximity to known charging locations.

Touch Chargers in the Navigation search bar to toggle between types of chargers, including Superchargers and destination charging sites.

When you are at risk of driving beyond the range of known charging locations, the touchscreen displays a message giving you the opportunity to display a list of charging locations that are within range. When you select a charging location from the list, Cybertruck provides navigation instructions and the turn-by-turn direction list displays the predicted amount of energy that will remain when you arrive at the charging destination.

Trip Planner routes you through Supercharger locations to minimize the amount of time you spend charging and driving. To enable, touch Controls > Navigation > Trip Planner.

The Energy app provides a visual representation of your vehicle's real-time and projected energy usage.

Touch to open the Energy app and choose from the different tabs. The energy chart's colored line represents your actual driving energy consumption whereas the gray line represents predicted usage. You can customize the chart units by touching Controls→ Display→ Energy Display.