Temporary Tire Repair Kit

You can purchase the temporary tire repair kit on the Tesla Shop.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
  • Do not drive on a deflated tire.
  • Do not remove any foreign objects found embedded in the tire.
  • Do not leave the compressor on for over 20 consecutive minutes.
  • Do not drive at high speeds or long periods of time. The temporary repair is designed to get your vehicle immediately and safely to a tire repair shop. Driving on temporarily repaired tires for long periods of time may cause serious damage or injury.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Follow all directions and warnings on the tire inflation kit.

Tire Repair

The tire inflation kit is a temporary repair only. You must repair or replace a damaged tire as soon as possible. For punctures larger than 1/4” (6 mm), severe tread damage, a damaged sidewall, ripped tires or tires that have come off the rim, contact Roadside Assistance. To temporarily repair a tire:

  1. Park your vehicle in a safe, open location.
  2. Ensure the compressor is Off.
  3. Remove the punctured tire valve cap on the vehicle and connect the transparent sealant tube to the valve opening.
  4. Insert the electrical plug into one of the vehicle's low voltage sockets.
  5. Turn the selector switch to the tire icon and turn On. Once the sealant has properly flowed into the tire, the gauge shows the current tire pressure. The ideal pressure is indicated on the driver's side door pillar of the vehicle. After several minutes, ensure the gauge shows the ideal tire pressure before continuing.
    Informational PurposesAn informational icon, calling your attention
    Note
    If the gauge still indicates a pressure of less than 22 PSI (1.5 Bar) after 15 minutes of consecutive operation, disconnect the transparent sealant tube and screw the tire valve cap back on. Drive for a few feet (meters) to allow the sealant to distribute within the tire. Park Model Y and re-try steps 2-5. If this still does not work, call Tesla Roadside Assistance.
  6. Turn the kit Off and disconnect the tube from the tire. Screw the tire valve cap back on.
  7. Drive within the indicated speed limit (shown on sticker on the tire repair kit) without suddenly accelerating or braking. After approximately 10 minutes of driving, park in a safe, open space again. Proceed to inflate the tire(s) now that the sealant has been distributed in the tire.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    The sealant liquid is efficient at temperatures between -40°F (-40°C) and 122° F (50°C). Do not use sealant liquid after the expiration date indicated on the label. See Canister Replacement for more information on replacing a used or expired canister.

Tire Inflation

  1. Make sure tire compressor is Off.
  2. Turn the switch to the pump icon.
  3. Insert the electrical plug into one of the vehicle's low voltage sockets.
  4. Remove the tire valve cap and connect the black inflation tube to the valve opening.
  5. Turn the compressor On until it reaches the ideal pressure indicated on the driver's side door pillar of the vehicle.
  6. Remove the black inflation tube and replace the tire valve cap.
  7. Turn the compressor Off and store in a safe, dry place.

Canister Replacement

  1. Purchase refills from the manufacturer or online from https://shop.tesla.com/.
  2. Remove the used canister by taking out the transparent sealant tube and setting it aside.
  3. Press the red release button while lifting out the canister.
  4. Insert the new canister by pressing it firmly into the case. Re-attach the transparent sealant tube. Take note of the new canister’s expiration date.
  5. Dispose of the empty canister properly according to local regulations.