Child Safety Seats

Passenger Front Airbag Must Be OFF

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If seating a child on the front passenger seat is permissible in your market region, never seat a child on the front passenger seat when the passenger front airbag is active. Always ensure this airbag is OFF (see Airbag Status Indicator).

Refer to the following label fitted to the sun visors:

Airbag warning label located on the sun visor with 1) a child seat depicted in front seat with a red circle-backslash 2) a deployed airbag with a rear-facing child seat and child 3) a hand pointing to an open book with an "I"

When an infant or child is seated in the front passenger seat (even when the child is seated in a suitable child restraint system or booster seat), you must disable the passenger front airbag. If a collision occurs, the inflation of the airbag can cause serious injury or death, especially when using a rear-facing child restraint system.

To disable the passenger front airbag, first ensure the vehicle is in Park. Then touch Controls > Safety > Passenger Front Airbag (see Controlling the Passenger Front Airbag).

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
When you disable the passenger front airbag, remember to subsequently enable it when an adult occupant is seated in the front passenger seat.

The status of the passenger front airbag displays in the top corner of the touchscreen. You can also touch this status icon to disable and enable the passenger front airbag:

Icon of passenger with airbag and text: Passenger airbag OFF
Before driving with a child seat on the front passenger seat, always double-check the status of the passenger front airbag to confirm that it is OFF.
Icon of child in child seat with circle-backslash and text: Passenger airbag on
To protect an adult subsequently occupying the front passenger seat, remember to turn the passenger front airbag back ON.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
It is the driver's responsibility to confirm that the passenger front airbag is OFF when a child is seated in the front passenger seat.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If the passenger front airbag is ON, even if you have turned it OFF (or vice versa), use the mobile app to schedule a service appointment immediately.

Suitability and Fitting of Child Restraint Systems

All Model Y seat belts are designed for adults. When seating infants and children, you must:

Informational PurposesAn informational icon, calling your attention
Note
When installing a child restraint system, you must also buckle the seat belt to silence the seat belt warning chime.

Recommended Child Restraint Systems

In the table below, Tesla provides recommended child restraint systems based a child's weight group (as defined in ECE R44 “Uniform Provisions Concerning Restraining Devices for Child Occupants"). Although all weight groups can occupy any passenger seat in Model Y, the type of child restraint system that can be used in each seat can vary. For example, only belt-based child restraint systems (as defined in Two Installation Methods) can be used in the second row center passenger seat.

Weight Group/ Size Child Weight Tesla Recommended
Group 0+ Up to 13 kg (12-18 months) Maxi-Cosi CabrioFix i-Size & Familyfix 3 / Cabriofix i-Size Base
45-105 cm Maxi-Cosi Pearl 360 with Familyfix 360
100-150 cm Britax Romer KIDFIX i-Size (see instructions below)
Booster Peg Perego Viaggio 2-3 Shuttle base

Britax Romer KIDFIX i-Size

When using the Britax Romer KIDFIX I-Size child restraint system as recommended by Tesla for children 100-150 cm, you must also use the Britax SecureGuard. When using the Britax SecureGuard, keep the lap belt flat across the child’s hips. Do not put the sash belt under the SecureGuard. For details, refer to the instructions provided by Britax.

Seating Larger Children

If a child is too large to fit into a child restraint system, but too small to be safely secured using the vehicle's seat belts, use a booster seat appropriate for the child’s age and size. For children needing a booster seat, Tesla recommends using the base of the Peg Perego Viaggio 2-3 Shuttle. When using and installing a booster seat, carefully follow the instructions provided by the manufacturer.

Two Installation Methods

Informational PurposesAn informational icon, calling your attention
Note
Always install child restraint systems by following the instructions provided by the manufacturer of the child restraint system.

Among many other variants, there are two general types of child restraint systems based on how they are secured in the seat:

Some child restraint systems can be installed using either method. Refer to the instructions provided by the manufacturer of the child restraint system to determine which installation method to use and for detailed installation instructions.

In Model Y, belt-based child restraints can be installed in any passenger seat and ISOFIX/i-Size systems can be installed in either of the second row outboard seats. Specific details about the type of child restraint system that can be used in each seat is provided next.

Informational PurposesAn informational icon, calling your attention
Note
ISOFIX and i-Size are international standards for integrated anchors used in passenger vehicles to attach child safety seats.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Do not use ISOFIX/i-Size anchors with child restraint system or booster seats that have an integral safety belt where the combined weight of the child plus the child restraint system exceeds 33 kg.

Front Passenger Seat

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Never seat a child on the front passenger seat when the passenger front airbag is active. Doing so can cause serious injury or death. See Airbags.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
To accommodate a belt-based child restraint system in the front seat, you must raise the seat upward to the mid-height position (approximately 3 cm).
10 images of the front passenger seat. 1) Green check with "Passenger Airbag OFF", 2) Rear-facing child seat with blue arrows pointing backwards and upwards. The following 4 images have green checks 3) forward-facing child seat, 4) rear-facing child seat, 5) booster seat, 6) rear-facing child seat with safety leg and the following 4 images using ISOFIX/i-Size anchor bars have red Xs: 7) forward-facing child seat, callouts A, B, B1 8) rear-facing, sizes C, D, E 9) forward-facing with safety leg 10) rear-facing with safety leg

When the passenger front airbag is disabled and the seat bottom is raised half way up, infants and children can occupy the front passenger seat using the following types of belt-based child restraint systems:

  • Forward-facing, Universal.
  • Rear-facing, Universal.
Informational PurposesAn informational icon, calling your attention
Note
The front passenger seat is not equipped with lower anchor bars to support the installation of ISOFIX/i-Size child restraint systems.
Weight Group Child Weight Passenger Front Airbag ON Passenger Front Airbag OFF
Group 0 Up to 10 kg Not Allowed Allowed
Group 0+ Up to 13 kg Not Allowed Allowed
Group I 9 to 18 kg Not Allowed Allowed
Group II 15 to 25 kg Not Allowed Allowed
Group III 22 to 36 kg Not Allowed Allowed

Second Row Outboard Seats

10 images of the rear outboard seats. 1) Green checks in outboard seats with blue arrows pointing to ISOFIX (IU)//i-Size latches and a blue arrow pointing to strap location, 2) Rear-facing child seat and arrows pointing forward and upwards on the front seat. The following 8 images have green checks 3) forward-facing child seat, 4) rear-facing child seat, 5) booster seat, 6) forward-facing child seat with safety leg using ISOFIX/i-Size anchor bars 7) rear-facing child seat with safety leg using ISOFIX/i-Size anchor bars 8) close-up of safety leg 9) forward-facing child seat using ISOFIX anchor bars and callouts A, B, B1 10) rear-facing child seat using ISOFIX anchor bars and callouts C, D, E

Infants and children can occupy a second row outboard seat using either belt-based, or ISOFIX (IU)//i-Size (i-U) child restraint systems.

Larger children can also occupy a second row outboard seat using a booster seat, either attached to the lower anchor bars or belted, as described in the instructions provided by the child restraint system manufacturer.

The second row outboard seats support the use of the following ISOFIX/i-Size size classes:

  • Size class A, B, and B1 forward-facing.
  • Size class C, D and E rear-facing.
Informational PurposesAn informational icon, calling your attention
Note
All rear seats support the use of upper tether straps (see Attaching Upper Tether Straps).
Informational PurposesAn informational icon, calling your attention
Note
Before installing a child restraint system, ensure the seat's corresponding back rest is adjusted to the most upright position.
Informational PurposesAn informational icon, calling your attention
Note
To accommodate large rear-facing ISOFIX/i-Size child restraint systems (size class C), you may need to move the corresponding front seat forward to the mid-track position (up to 13 cm forward of the rearmost position), raise the seat upward (2 cm from its lowest position), and angle the seat back as needed.
Informational PurposesAn informational icon, calling your attention
Note
If the vehicle headrest prevents the child restraint system from touching the seat's back or side bolsters, temporarily remove the headrest for a better fit. Reinstall the headrest once the child restraint system is no longer in use.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Do not use Easy Entry (see Driver Profiles) to automatically move the driver's seat to the full rearward position if a child safety seat is installed on the secondo row seat located behind the driver's seat. With reduced clearance, the movement of the seat may impact a child's legs, cause injury, or dislodge the seat.

Second Row Center Seat

10 images of the rear center seat. 1) Green check on center seat, 2) Rear-facing child seat and arrows pointing forward and upwards on the front seat. The following 4 images have green checks 3) forward-facing child seat, 4) rear-facing child seat, 5) booster seat, 6) close-up of safety leg. The following 4 images have red Xs 7) forward-facing child seat using ISOFIX anchor bars and callouts A, B, B1 8) rear-facing child seat using ISOFIX anchor bars and callouts C, D, E 9) forward-facing child seat using ISOFIX/i-Size anchor bars and safety leg 10) rear-facing child seat using ISOFIX/i-Size anchor bars and safety leg

Infants can occupy the second row center seat using a rear-facing belt-based child restraint system. Children can occupy the second row center seat using either a rear-facing or a forward-facing belt-based child restraint system.

Informational PurposesAn informational icon, calling your attention
Note
The second row center seat is not equipped with lower anchor bars to support the installation of ISOFIX/i-Size child restraint systems.
Informational PurposesAn informational icon, calling your attention
Note
Before installing a child restraint system, ensure the seat's corresponding back rest is adjusted to the most upright position. To ensure a good fit in the center seat, the seat backs on both the left and right outboard seating positions may need to be in the same position.

Larger children can also occupy the second row center seat using a booster seat, installed as described in the instructions provided by the manufacturer of the child restraint system.

Installing Belt-based Child Restraint Systems

Always follow the detailed instructions provided by the manufacturer of the child restraint system. Follow these general guidelines for belt-based child restraint systems:

  • Ensure that the child restraint system is appropriate for the weight, height, and age of the child.
  • Avoid dressing the child in bulky clothing.
  • Do not place any objects between the child and the child restraint system.
  • Adjust the child restraint system's harnesses for every child, every trip.
  1. Place the child restraint system in the appropriate seat and fully extend the seat belt. Route and buckle the seat belt in accordance with the instructions provided by the manufacturer of the child restraint system.
    A child safety seat buckled into a passenger seat using the vehicle's seat belt.
  2. Allow the seat belt to retract, and remove all slack in the seat belt while firmly pushing the child restraint system into the vehicle's seat.
  3. Attach the upper tether strap(s), as required by the manufacturer of the child restraint system (see Attaching Upper Tether Straps).

Installing ISOFIX/i-Size Child Restraint Systems

Second row outboard seating positions are equipped with ISOFIX/i-Size anchor bars. These anchor bars are located between the seat's cushion and back rest. The exact location of each anchor bar is identified by a marking located on the seat back, directly above its associated anchor bars.

The ISOFIX icon and arrows showing the location of ISOFIX latches.

In the second row, install ISOFIX/iSize child safety seats in the outboard seating positions only. Use only a seat belt retained seat in the center position.

Two green check marks on outboard second row seats and a red X on the center seat

To install an ISOFIX/i-Size child restraint system, carefully read and follow the instructions provided by the manufacturer of the child restraint system. These instructions describe how to slide the child restraint system onto the seat’s anchor bars until you hear it "click" into place. You may need to push the child restraint system firmly against the seat back to ensure it fits snugly.

A child seat sliding into place with a speech bubble with an exclamation point in it, pointing to the anchor bar

Before seating a child, ensure that the child restraint system is securely installed. Grasp the front of the child restraint system with one hand on each side, and attempt to:

  • Twist the child restraint system from side to side.
  • Pull the child restraint system away from the seat.

If the child restraint system rotates or moves away from the seat, both latches are not fully engaged onto the seat's anchor bars. You must reinstall it and try again. It is critical that both latches on the child restraint system are fully engaged.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Do not use ISOFIX/i-Size anchors with child restraint system or booster seats that have an integral safety belt where the combined weight of the child plus the child restraint system exceeds 33 kg.

Safety Leg

All passenger seats Model Y support the use of a child restraint system with a safety leg. If the child restraint system is equipped with a leg, extend the leg as described in the instructions provided by the manufacturer of the child restraint system.

Child seat safety leg with arrow pointing down and away from the seat

Attaching Upper Tether Straps

If an upper tether strap is provided, attach its hook to the anchor point located behind the rear seat.

Informational PurposesAn informational icon, calling your attention
Note
The location of anchor points may not be readily visible but can be found by identifying a slice in the seat's material.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Tighten upper tether straps according to the instructions provided by the manufacturer of the child safety seat.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
USE ONLY SEAT BELT RETAINED CHILD SAFETY SEATS IN THE CENTER SEATING POSITION.
Location of anchor points behind the rear seats
Location of anchor points behind the rear seats

Make sure the hook is fully seated on the anchor point.

Strap with hook on anchor point

For dual-strap tethers in the second row, position a strap on each side of the head support.

Straps positioned on either side of the head support
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Before routing a tether strap OVER a head support, you MUST LOWER the head support (see Head Supports).

For single-strap tethers at the outboard seating positions in the second row, route the strap over the outside-facing side of the head support (same side of the head support as the seat belt retraction mechanism).

Strap running over outside of head support

If routing the strap over the outside-facing side of the head support is not possible (such as there is not enough slack in the strap), raise the head support (see Head Supports) and route the strap under the head support.

Technical Information

ECE 16-08 Annex 17, Appendix 3, Table 1

Seat Position Number (see below)

1 and 3
Pass Airbag OFF

1 and 3
Pass Airbag ON

4 5 6 7 (if equipped) 9 (if equipped)
Weight Groups Allowed 0, 0+, I, II, III n/a 0, 0+, I, II, III 0, 0+, I, II, III 0, 0+, I, II, III 0, 0+, I, II, III 0, 0+, I, II, III
Suitable for universal belted? Yes* No Yes Yes Yes Yes*** Yes***
Suitable for i-Size? No No Yes No Yes No No
Suitable for lateral (L1/L2)? No No No No No No No
Largest suitable rearward-facing ISOFIX/i-Size (R1/R2X/R2/R3). No No R3* No R3** No No
Largest suitable forward-facing ISOFIX/i-Size (F1/F2X/F2/F3). No No F3 No F3 No No
Largest suitable booster seat (B2/B3). B2* No B3 No B3 No No
Suitable for safety leg Yes No Yes Yes Yes No No

Adult safety belt buckles are not located laterally between ISOFIX/i-Size anchor bars in any seat.
*To accommodate a belt-based child restraint system (CRS) in the front seat, you must raise the seat upward to the mid-height position (~3 cm) and rearward to allow for room between the CRS and the dashboard.


**To accommodate large ISOFIX/i-Size child restraint systems (size class C), you may need to move the corresponding front seat forward to the mid-track position (up to 13 cm forward of the rearmost position), raise the seat upward (3 cm from its lowest position), and angle the seat back to 15 degrees (or 10 degrees rearward from its forward-most position).

*** When a universal belted child restraint system is installed in the third row, the outboard and center seats in the second row cannot be used.

Summary of Seat Position Numbers

Seat Position Location in Vehicle
1 Front Left (RHD vehicles only)
3 Front Right (LHD vehicles only)
4 Second Row Left
5 Second Row Center
6 Second Row Right
7 Third Row Left
9 Third Row Right

Child Restraint System Warnings

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Never seat a child in a child restraint system or a booster seat on the front passenger seat when the passenger front airbag is active. Doing so can cause serious injury or death.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Never use a rearward facing child restraint system on a seat protected by an active passenger front airbag. Doing so can cause serious injury or death. Refer to the warning label located on the sun visor.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Some child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt. Children could be endangered in a crash if their child restraint systems are not properly secured in the vehicle.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Do not use a forward-facing child restraint system until your child weighs over 9 kg and can sit independently. Up to the age of two, a child's spine and neck are not sufficiently developed to avoid injury in a frontal impact.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Do not allow a baby or infant to be held on an adult's lap. All children should be restrained in an appropriate child restraint system at all times.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
To ensure children are safely seated, follow all instructions provided in this document and by the manufacturer of the child restraint system.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
The seat belt reminder on the touchscreen is not a substitute for checking if a small occupant or a child safety seat is properly secured. The seat occupancy sensors may not identify small occupants or child seats.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Children should ride in a rear-facing child restraint system using the seat’s integrated 5-point harness for as long as possible until they reach the maximum size or weight limit of the rear-facing child restraint system.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
When seating larger children, make sure the child's head is supported and the child’s seat belt is properly adjusted and fastened. The shoulder portion of the belt must be away from the face and neck, and the lap portion must not be over the stomach.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Never attach two child restraint systems to one anchor point. In a collision, one anchor point may be incapable of securing both seats.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Child restraint anchor bars are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or equipment to the vehicle.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Always check harnesses and tether straps for damage and wear.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Never leave a child unattended, even if the child is secured in a child restraint system.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Never use a child restraint system that has been involved in a collision. Discard the seat and have it replaced as described in the child restraint system manufacturer’s instructions.