Autopark

Informational PurposesAn informational icon, calling your attention
Note
Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with Autopark.

Autopark uses data to simplify parking on public roads by maneuvering Model X into parallel and perpendicular parking spaces.

Informational PurposesAn informational icon, calling your attention
Note
Autopark is unavailable when Traffic-Aware Cruise Control is enabled. To use Autopark, enable Autosteer or Full Self-Driving (Supervised) by touching Controls > Autopilot.

If your access to Autosteer and Full Self-Driving (Supervised) is suspended, you also lose access to Autopark. For more information, see Autopilot Suspension.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
It is your responsibility to familiarize yourself with the limitations of Autopark and the situations in which it may not work as expected. For more information, see Limitations and Warnings.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Do not use Autopark if anything, such as a ball hitch, bike rack, or trailer, is attached to the tow hitch. Autopark may not stop for hitches when parking between or in front of other vehicles.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Autopark's performance depends on the ability of the cameras to determine the vehicle's proximity to curbs, objects, and other vehicles. Ensure all cameras are clean and free of obstructions before each drive and before using Autopilot features (see Cleaning a Camera). Dirty cameras and sensors (if equipped), as well as environmental conditions such as rain and faded lane markings, can affect Autopilot performance. If a camera is obstructed or blinded, Model X displays a message on the instrument cluster and Autopilot features may not be available. For more information on specific alerts, see Troubleshooting Alerts.

Parameters

Autopark detects potential parking spaces based on the following parameters:

Perpendicular Parking
  • Your driving speed must be below 8 mph (13 km/h). If driving too fast, Autopark may not be able to accurately detect your desired parking space.
  • The parking space must be at least as wide as your vehicle.
  • The parking space must have at least three visible lines for the vehicle to park into, such as parking lines, road markings, or distinct curbs. Autopark may not work in a garage, for example, without three visible parking lines.
  • Autopark may not work with textured road surfaces such as cobblestone or brick.
Parallel Parking
  • Your driving speed must be below 8 mph (13 km/h). If driving too fast, Autopark may not be able to accurately detect your desired parking space.
  • There must be a vehicle in front of or behind the space you want to park in.
Informational PurposesAn informational icon, calling your attention
Note
Autopark does not operate on angled parking spaces.

To Use Autopark

When driving, follow these steps to allow Autopark to maneuver Model X into a parking space:

  1. While driving slowly, monitor the instrument cluster to see potential parking spaces detected by Autopilot. When Model X is positioned such that it can reverse into one of the detected locations, the instrument cluster displays potential open parking spaces.
    Informational PurposesAn informational icon, calling your attention
    Note
    The detected parking spaces appear only if the vehicle's position and/or the circumstances of the surrounding area are such that Autopark can determine an appropriate driving path. If Autopark cannot determine an appropriate path (for example, when driving on a narrow street where moving into the parking space causes the front of the vehicle to extend into the adjacent lane), you can either reposition the vehicle, find a different parking space, or park manually.
  2. Move the right scroll wheel up or down to select a parking space. Check to determine if it is appropriate and safe, then pull forward and stop approximately one car length ahead of the parking space (as you normally would when parallel parking or when backing into a perpendicular parking space).
  3. When ready to park, press the right scroll wheel button and release the steering yoke (or steering wheel).
  4. Autopark displays a message when parking is complete.

If you press the brake pedal when Autopark is actively parking Model X, the parking process pauses until you touch Resume on the touchscreen.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Never depend on Autopark to find a parking space that is legal, suitable, and safe. Autopark may not always detect objects in the parking space. Always perform visual checks to confirm that a parking space is appropriate and safe.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
When Autopark is actively steering Model X:
  • Do not interfere with the movement of the steering yoke (or steering wheel). Doing so cancels Autopark.
  • Continually check your surroundings. Be prepared to apply the brakes to avoid vehicles, pedestrians, or objects.
  • Monitor the touchscreen and instrument panel to ensure that you are aware of the instructions that Autopark is providing.

To Pause Parking

To pause Autopark, press the brake pedal once. Model X stops and remains stopped until you touch Resume on the touchscreen.

To Cancel Parking

Autopark cancels the parking sequence when you manually move the steering yoke (or steering wheel), shift, or touch Cancel on the touchscreen. Autopark also cancels parking when:
  • The parking sequence exceeds seven moves.
  • Model X detects that the driver is exiting the vehicle.
  • A door is opened.
  • You press the accelerator pedal.
  • You press the brake pedal while Autopark is paused.
  • An Automatic Emergency Braking event occurs (see Collision Avoidance Assist).