Automatic Garage Opener - HomeLink

The Homelink Automatic Garage Opener can be installed as a retrofit for Model 3 and Model Y. Homelink connects your Tesla to a maximum of three radio-frequency controlled devices (including garage doors, gates, lights and security systems).

Order Homelink on the Tesla Shop. Your Homelink parts will ship directly to you. Once they arrive, schedule a service appointment to complete the install.

Frequently Asked Questions Show All Hide All

Visit the Tesla Shop to purchase Homelink for Model 3 and Model Y. Pricing includes installation costs. You can also purchase Homelink at your local Service Center.
Your Homelink parts will be shipped to the shipping address you enter at checkout. Once the parts arrive, schedule a service appointment in the Tesla app to complete installation.

Note: Do not tamper with the box or installation may be voided.
No. Homelink installation must be done by a Tesla service technician. You can schedule your installation appointment in the Tesla app.
To program Homelink in Model 3 and Model Y, follow these steps. Pairing instructions are also available in your Owners Manual.

Note: Only devices with a rolling code remote need to go through the 'Learn' process. If you have an old device that is not equipped with a rolling code remote or it is ‘Quick-Train’ compatible, you can skip this part of the process.
Check the batteries in the remote.

Hold the remote against the front bumper approximately 6 inches left of the Tesla emblem and hold the button down. It may take as long as 3 minutes.

Check the compatibility of the remote by contacting the HomeLink manufacturer.
Make sure you are pressing the receiver's LEARN button. Most receivers have two buttons and an LED. For instructions on how to put the receiver into learning mode, refer to the owner documentation provided with the HomeLink device.

Most devices stay in learning mode for 3-5 minutes. Immediately after pressing the ‘Learn’ button, follow the instructions displayed on the touchscreen.

Park your vehicle with its front bumper as close as possible to the HomeLink device.

Make sure you haven’t reached the device receiver's limit of learned remotes/cars. Most receivers can learn up to five remotes/cars. If the receiver's memory is full, you must clear the memory and restart the programming process. For instructions on how to clear the receiver's memory, refer to the owner documentation provided with the HomeLink device.